CPM-700 [Countersurveillance Probe/Monitor]

The CPM-700 is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders.

Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs.

The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.

There are several "imitations" of the CPM-700 on the market because of it's success as a product. While some of these copies may be cheaper, they do not provide the frequency performance and sensitivity of the CPM-700. We guarantee it!

CPM-700 Advantages

  • Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase.
  • Multi-Functional Utility - Comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage.
  • Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
  • Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.
  • Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.

Specifications

R.F. Probe:

  • Gain: 20dB nominal Frequency
  • Response: 50kHz-2GHz ±3dB 3GHz-10dB
  • Sensitivity: -62dBm (1 segment) -85dBm M.D.L.

VLF Probe:

  • Frequency Response: 15kHz-1MHz-3dB
  • MAX input voltage: 300 VAC 50-60Hz
  • Isolation: 1500 VAC 60Hz
  • Sensitivity: -38dBm (1 segment) -60 M.D.L.

Audio Amplifier:

  • Input Impedance: 50K Ohm balanced
  • Input Range: 1.7uV-10V (135dB) AGC
  • Dynamic Range: 100dB (high and low gain)
  • Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave
  • Headphone Output: 5Vp-p 220 Ohms
  • Record Out: 25 mVp-p nominal with AGC

Display:

  • LCD bargraph: 18 segment with pulsing single segment trip point
  • 50dB dynamic range (1 segment High Gain to MAX Low Gain)
  • Alert Output: 2.8kHz tone or silent red LED at 2Hz
  • Remote Output: N.O. contact (300mA 25V MAX)

Battery:

  • 8 ea. MN1500 AA Alkaline - Life 10-16 hrs
  • (Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
  • Low Battery Indicator: approx. 10% remaining power

AC adpter/Charger:

  • Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz
  • Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs

CPM-700 Unit:

  • Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm
  • Weight: 39 oz, 1.1 kg

Carry Case with all standard Items:

  • Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm
  • Weight: 7 lbs, 3.18 kg
Additional Products
IRP-700 Infrared Probe
MLP-700 Magnetic Leakage Probe
ALP-700 Acoustic Leakage Probe
MLP-700 Modular Phone Adaptor
TRP-700 Tape Recorder Patch Cable
CLA-700 Cigarette Lighter Adaptor
NCB-700 Ni-Cad Battery Pack
LAA-1530 Log Active Antenna (1.5-3.0 GHz)
BMP-1200 Broadband Microwave Probe (2-12 GHz)