RFX-1500/2500 Technicians Locator:

The RFX-1500/2500 Wire and Cable Locator is designed to trace and locate, all types of inside and outside wiring and piping.

The RFX-1500/2500 takes the design of the RFX Family of locators one step further.

The RFX-1500 Transmitter can be connected to LIVE AC power (up to 220VAC) to allow tracing of live electrical circuits in the house, or buried outdoors.

When connected to WORKING telephone lines, the RFX-1500 Transmitter is totally Transparent. It is not audible on phone lines, does not disrupt FAX, modem, or voice communications.

The RFX-1500 Transmitter can even transmit into a ground, so you can trace GAS and WATER pipes buried outside.

The RFX-1500/2500 is a sophisticated RADIO transmitter and receiver operating at 455khz, with two user selectable modulation Tones (600hz/800hz). And two user selectable transmit modes (continuous and dual modulation). Continuous Mode is used for Tracing and Dual Modulation Mode is used with our PATENTED earth probing technology.

As it is Radio Based, the RFX-1500/2500 system has a detection range of over 10 feet indoors, and can detect buried wiring and cables down to 3 feet or more outdoors.

The Printed Circuit Boards of theRFX-1500/2500 are Conformal Coated to protect them from water and moisture.

The RFX-2500 has a headset jack for listening in noisy environments. C.I. has a Headset Model we recommend that comes with a remote volume switch.

The System uses a "Null" mode Antenna. When you point the antenna at the hidden wire , you do not hear the signal. This allows you to pinpoint the exact location of a hidden wire or cable to with in the width of the antenna.

The RFX-1500/2500 System is housed in STURDY metal cases, and is supplied in an attractive plastic carrying case. All units come with a 2-meter ground extender lead, and are fully warranted for 1 year.

The RFX-1500/2500 System is powered off of a 9-volt battery (1 each).

Product Features:

Transparency:

The RFX Family of locators are completely transparent on live phone lines and as such will not disrupt Fax, Modem or Voice communications.

Accuracy:

The RFX Family of receivers work in Null Mode. This allows pinpoint location of wires and cables hidden in walls and ceilings, or in the ground.

Multifunction:

The RFX Family of locators can be direct connected to Live AC Power lines (up to 250VAC), Live telephone lines (with full transparency), and to dead copper conductors.

Low Cost:

The RFX Family of locators are priced competitively to compete with machines costing thousands of dollars.

Expandable:

The RFX Family of locators can be expanded by purchasing a 1 watt transmitter and other accessories.

Headset Jack:

The RFX-2500 Receiver incorporates a Headset Jack. This allows you to work in noisy environments or in areas where you can not make any noise.

Second Modulation Tone:

The RFX-1500 transmitter has a second modulation source to increase you locating success.

Large Carry Case:

the RFX-1500/2500 locator kit comes in a larger carry case. This case has room for a headset , ground rod, bnc cable and ground extender cable.

Product Specifications:

  RFX-1500 Transmitter RFX-2500 Receiver
Dimensions: 3.01"W x 5.1"L x 1.0"H 3.01"W x 5.1"L x 1.0"H
Weight: 345 grams / 12oz 357 grams / 13oz
Power Consumption: 10ma / 90mw 17-40ma / 125-320mw
Power Source: 9-volt Battery 9-volt Battery
Input Protection: 250 VAC/DC 100 VDC ONLY
RF Output Frequency: 455 khz N/A
Modulating Frequencies: 600 hz / 800 hz / 8hz / 16hz N/A
RF Output Power: 10 mw N/A
Environmental Ratings: 14F to 135F 14F to 135F